Lejoe mohlala SPC Vinyl fatše bakeng sa bolulo le khoebo
Tlhaloso:
Ntho ea bohlokoa: TPS006-B
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 18" X 18"/ 24" X 24", Ho itloaetsa
Re kopantsoe ka mokhoa o makatsang le oa 'nete oa majoe ka sebopeho sa lepolanka sa 12” X 24”, re theha chebahalo e ntle e loketseng kamore efe kapa efe.Lithaele tsa Vinyl tse Rigid Core li hahiloe ho boloka botle ba tsona - esita le tlas'a sephethephethe se phahameng, mongobo o phahameng le tšusumetso e phahameng.
Mohlala oa TPS006-B ke mohlala oa majoe, oo e tla ba thaele ea fatše e tsitsitseng e tsebahalang matsatsing a 'maloa a tlang ho nka sebaka sa lithaele tsa 'mabole / tsa majoe.
Lipono le libopeho tsa hyper-realistic, li-bevel tse ntlafalitsoeng le mefuta e metle ea mebala e fana ka chebahalo le maikutlo a 'nete a ntho ea' nete, ntle le mathata a tlisoang ke ntho ea 'nete.Mefuta e mengata ea likhetho e molemo ho ba batlang ho khona ho fetola ponahalo ea lehae la bona.E ka kenngoa libakeng tsa lehae tse kang likamore tsa ho hlatsoetsa liaparo, liphaposi tsa ho hlapela, likamore tse ka tlase, le kichine.
Tlhokomelo ha se bothata ho hang, lesela le tšoarellang le kalafo ea UV ka holimo li etsa hore ho be bonolo haholo ho li boloka li hloekile.Ho hloekisa khafetsa kapa ho fiela le ho kokota ka linako tse itseng ho tla loka.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 7.25" (184mm.) |
| Bolelele | 48" (1220mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
| SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND - Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND - Feta |
| Finyella | No 1907/2006 REACH | ND - Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND - Feta |
| PCP | BS EN 14041:2018 | ND - Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND - Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
