Metsi a sa keneleng metsi a Oak Wooden SPC Sefate sa Vinyl
Tlhaloso:
Ntho:TYM217
Botenya:4.0mm ~ 8.0mm
Wear Layer:0.2mm ~ 0.7mm
Katlase (Ka boikhethelo):EVA/ IXPE, 1.0mm ~ 2.0mm
Boholo:12" X 24"/ 12" X 12"/ Ho iketsetsa
SPC vinyl flooring e entsoe ka mokhoa oa ho shebahala oa Marble.E le e 'ngoe ea mapolanka a sa keneleng metsi har'a fuluru e tsebahalang matsatsing ana, e ithorisa ka bokhoni bo matla ba ho thibela metsi bo ka sebelisoang ka ho felletseng ka metsi bakeng sa motheo oa eona o thata.Hape, ka sebopeho sa eona sa ZERO formaldehyde, e se e ntse e tsebahala fatše lits'ebetsong tsa bolulo le tsa khoebo.
Lintlha tsa Sehlahisoa:
Ha re bua ka khetho ea ho beha fatše mehleng ena, re na le likhetho tse ling tse ntle, joalo ka WPC, Hardwood, LVT, le SPC, tsena kaofela ke mefuta e tsebahalang.Empa e 'ngoe e ipabola haholo bakeng sa likarolo tsa eona tse ntle ka likarolo tse ngata.SPC fatše, e entsoeng ka motsoako oa limestone le vinyl resin, phofo ea lejoe ke thepa ea eona e tala.Ke kahoo e bitsoang rigid core, ho tloha ka lebitso la eona u ka tseba hore e na le mokokotlo o matla ka ho fetisisa joaloka lepolanka, hajoale e ka 'na ea e-ba 100% e sa keneleng metsi ha e sebelisoa ka metsi, ha e na bothata ba metsi ha e bapisoa le mefuta e meng, sena se ka' na sa ngola potso. ho uena ebe u khetha mofuta oa fatše, ho sa tsotellehe hore na ke oa bolulo kapa oa tšebeliso ea khoebo, ha ho pelaelo hore tsela eo e sebetsanang le metsi ka eona kamehla ke e 'ngoe ea lintlha tseo u tla li nahana, ka SPC flooring u ka kholiseha ka 100%.Ho latela hore na e shebahala joang, le uena u ka beha tšepo ea hau ho eona, SPC flooring e ka fumaneha ka lipaterone tse likete.Bolela feela sebaka seo u se batlang moo u hlokang ho khabisa, fatše SPC e lula e na le mohlala o le mong o nepahetseng bakeng sa hau.
| Tlhaloso | |
| Sebopeho sa Bokaholimo | Sebopeho sa Lehong |
| Kakaretso Botenya | 4mm |
| Katlase (Ka boikhethelo) | IXPE/EVA(1mm/1.5mm) |
| Apara Layer | 0.2 limilimithara.(8 Mil.) |
| Bophara | 12" (305mm.) |
| Bolelele | 24" (610mm.) |
| Qetella | Ho roala ha UV |
| Locking System |
|
| Kopo | Khoebo & Bolulo |
Lintlha tsa Tekheniki:
 SPC RIGID-CORE PLANK DATA TSA BOTHEKELETSO | ||
| Boitsebiso ba Theknoloji | Mokhoa oa Teko | Liphetho |
| Dimensional | EN427 & | Feta |
| Botenya ka kakaretso | EN428 & | Feta |
| Botenya ba li-wear layers | EN429 & | Feta |
| Botsitso ba Dimensional | IOS 23999:2018 & ASTM F2199-18 | Tataiso ea Tlhahiso ≤0.02% (82oC @ 6hrs) |
| Litaelo Tse Ntle ho Tlhahiso ≤0.03% (82oC @ 6hrs) | ||
| Mokokotlo (mm) | IOS 23999:2018 & ASTM F2199-18 | Boleng ba 0.16mm(82oC @ 6hrs) |
| Matla a Peel (N/25mm) | ASTM D903-98(2017) | Manufacturing Direction 62 (Karolelano) |
| Across Manufacture Direction 63 (Karolelano) | ||
| Moroalo o tsitsitseng | ASTM F970-17 | Sekhahla se setseng: 0.01mm |
| Residual Indentation | ASTM F1914-17 | Feta |
| Khanyetso ea Scratch | ISO 1518-1:2011 | Ha ho letho le kentseng seaparo ka mojaro oa 20N |
| Ho Notlela Matla(kN/m) | ISO 24334:2014 | Tataiso ea Tlhahiso 4.9 kN/m |
| Ho pholletsa le Tataiso ea Tlhahiso 3.1 kN/m | ||
| Mebala e potlakileng ho Leseli | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005& ASTM D2244-16 | ≥6 |
| Karabelo ho mollo | BS EN14041:2018 Clause 4.1 & EN 13501-1:2018 | Bfl-S1 |
| ASTM E648-17a | Sehlopha sa 1 | |
| ASTM E 84-18b | Sehlopha sa A | |
| Phatlalatso ea VOC | BS EN 14041:2018 | ND – Feta |
| ROHS / Heavy Metal | EN 71-3:2013+A3:2018 | ND – Feta |
| Finyella | No 1907/2006 REACH | ND – Feta |
| Ho tsoa ha formaldehyde | BS EN14041:2018 | Sehlopha: E1 |
| Tlhahlobo ea Phthalate | BS EN 14041:2018 | ND – Feta |
| PCP | BS EN 14041:2018 | ND – Feta |
| Ho falla ha Lintho tse itseng | EN 71 – 3:2013 | ND – Feta |
Lintlha tsa ho paka:
| Lintlha tsa ho paka(4.0mm) | |
| Likhomphutha/ctn | 12 |
| Boima(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Boima(KG)/GW | 24500 |
