Marble ipa SPC arabara Tile
Apejuwe:
Ohun kan: TPS001-E
Sisanra:4.0mm ~ 8.0mm
Wọ Layer:0.2mm ~ 0.7mm
Underlay (Aṣayan):Eva / IXPE, 1.0mm ~ 2.0mm
Iwọn:12 "X 24"/ 18" X 18"/ 24" X 24", Iṣatunṣe
Stone Polymer Composite (SPC) jẹ ẹya olekenka-ti o tọ, mojuto ipon ti o ga ti o ni okuta oniyebiye adayeba.Pẹlu itumọ giga ti Layer vinyl ti ohun ọṣọ, ilana rẹ ati awọn awoara le ṣe afiwe okuta adayeba tabi okuta didan.Awoṣe yii ti KBM101-8 jẹ apapo ti imọ-ẹrọ ilẹ-ilẹ SPC tuntun pẹlu ẹwa ti ipa didan adayeba.
The Marble ipa SPC arabara Tilejẹ ọja ilẹ-ilẹ tuntun ti o ṣajọpọ awọn eroja adayeba pẹlu imọ-ẹrọ ilẹ-ilẹ fainali ode oni.Agbekale apẹrẹ ti aabo ayika alawọ ewe ati ipadabọ si iseda jẹ apẹrẹ lati ṣe iwọntunwọnsi ati ilọsiwaju ibatan inu laarin wa ati agbaye adayeba ni ori ati imọ-ọkan, lepa igbesi aye ilera, ati gbejade ibaraenisepo ninu apẹrẹ wiwo, eyiti o le dinku titẹ, yọkuro opolo rirẹ, mu iṣesi ati ki o mu ilera atọka.Awọn ilana okuta ọlọla ti o wa ni ipamọ, ewi bii kikun inki asesejade adayeba.Awọn laini alaibamu, iru ẹwa lasan kan wa, botilẹjẹpe o tutu, ṣugbọn tun ko ni rilara alaidun.O tun fihan kan adayeba ki o si ko air air ti aworan.Okuta ti ilẹ-ilẹ fainali mojuto kosemi jẹ itọju rọrun, mabomire ati antiskid, resistance resistance ati idoti idoti jẹ afihan ni kikun ni awọn ile ounjẹ hotẹẹli.Cool marbling sọ fun ọ lati bẹrẹ ọjọ tuntun nibi.
| Sipesifikesonu | |
| Dada Texture | Igi sojurigindin |
| Ìwò Sisanra | 4mm |
| Underlay (Aṣayan) | IXPE/EVA(1mm/1.5mm) |
| Wọ Layer | 0.2mm.(8 Milionu) |
| Ìbú | 7.25" (184mm.) |
| Gigun | 48" (1220mm.) |
| Pari | Aso UV |
| Titiipa System |
|
| Ohun elo | Iṣowo & Ibugbe |
Data Imọ-ẹrọ:
| SPC RIGID-mojuto PLANK imọ DATA | ||
| Imọ Alaye | Ọna idanwo | Esi |
| Onisẹpo | EN427 & amupu; | Kọja |
| Sisanra lapapọ | EN428 & amupu; | Kọja |
| Sisanra ti yiya fẹlẹfẹlẹ | EN429 & amupu; | Kọja |
| Iduroṣinṣin Onisẹpo | IOS 23999: 2018 & ASTM F2199-18 | Ilana iṣelọpọ ≤0.02% (82oC @ 6 wakati) |
| Kọja Itọsọna iṣelọpọ ≤0.03% (82oC @ 6 wakati) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Iye 0.16mm(82oC @ 6 wakati) |
| Agbara Peeli (N/25mm) | ASTM D903-98 (2017) | Ilana iṣelọpọ 62 (Apapọ) |
| Kọja Itọsọna iṣelọpọ 63 (Apapọ) | ||
| Aimi fifuye | ASTM F970-17 | Ifiweranṣẹ ti o ku: 0.01mm |
| Ti o ku Indentation | ASTM F1914-17 | Kọja |
| ibere Resistance | ISO 1518-1: 2011 | Ko si penetrated awọn ti a bo ni fifuye ti 20N |
| Titiipa Agbara (kN/m) | ISO 24334:2014 | Ilana iṣelọpọ 4.9 kN / m |
| Kọja Itọsọna iṣelọpọ 3.1 kN / m | ||
| Iyara awọ si Imọlẹ | ISO 4892-3: 2016 Cycle 1 & ISO105–A05:1993/Kọr.2:2005& ASTM D2244-16 | ≥ 6 |
| Ifesi si ina | BS EN14041: 2018 Abala 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Kilasi 1 | |
| ASTM E 84-18b | Kilasi A | |
| Awọn itujade VOC | BS EN 14041:2018 | ND - Pass |
| ROHS / Heavy Irin | EN 71-3: 2013 + A3: 2018 | ND - Pass |
| De ọdọ | Ko si 1907/2006 de ọdọ | ND - Pass |
| Formaldehyde itujade | BS EN14041:2018 | Kilasi: E1 |
| Idanwo Phthalate | BS EN 14041:2018 | ND - Pass |
| PCP | BS EN 14041:2018 | ND - Pass |
| Iṣilọ ti Awọn eroja | EN 71 – 3:2013 | ND - Pass |
Alaye Iṣakojọpọ:
| Alaye Iṣakojọpọ (4.0mm) | |
| Awọn PC/ctn | 12 |
| Àdánù(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ìwọ̀n (KG)/GW | 24500 |
