I-Marble effect SPC Hybrid Tile
Incazelo:
Ingxenye #:TPS001-E
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:12” X 24”/ 18” X 18”/ 24” X 24”, Ukwenza ngokwezifiso
I-Stone Polymer Composite (SPC) iwumgogodla oqinile, ominyene kakhulu ohlanganiswe ne-limestone yemvelo.Ngencazelo ephezulu yesendlalelo se-vinyl yokuhlobisa, iphethini yayo kanye nokwenziwa kwayo kungalingisa itshe lemvelo noma imabula.Le modeli ye-KBM101-8 iyinhlanganisela yobuchwepheshe bakamuva be-SPC bephansi obunobuhle bemvelo yemabula.
I-Marble effect SPC Hybrid Tileiwumkhiqizo omusha we-flooring ohlanganisa izakhi zemvelo nobuchwepheshe besimanje be-vinyl flooring.umqondo wokuklama wokuvikelwa kwemvelo okuluhlaza kanye nokubuyela emvelweni uklanyelwe ukulinganisela futhi uthuthukise ubuhlobo bangaphakathi phakathi kwethu nomhlaba wemvelo ngomqondo kanye nengqondo, ukuphishekela ukuphila okunempilo, futhi ukhiqize ukusebenzisana ekwakhiweni okubonakalayo, okunganciphisa ingcindezi, kukhulule ukukhathala kwengqondo, ngcono isimo sengqondo futhi ngcono inkomba yezempilo.Amaphethini amatshe ahloniphekile agciniwe, izinkondlo ezifana nomdwebo we-landscape we-splash inki wemvelo.Imigqa engavamile, kukhona uhlobo lobuhle obungavamile, nakuba kubanda, kodwa futhi ungazizwa unesithukuthezi.Iphinde ibonise umoya wemvelo nocacile wobuciko.Itshe libukeka liqinile core vinyl flooring ukunakekelwa lula, amanzi futhi antiskid, ukumelana ukugqoka kanye nokumelana namabala kubonakala ngokugcwele ezindaweni zokudlela zamahhotela.I-Marbling epholile ikutshela ukuthi uqale usuku olusha lapha.
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
