DIY Tẹ fifi sori kosemi mojuto Igbadun fainali plank
Apejuwe:
Nkan:UC1107-5
Sisanra:4.0mm ~ 8.0mm
Wọ Layer:0.2mm ~ 0.7mm
Underlay (Aṣayan):Eva / IXPE, 1.0mm ~ 2.0mm
Iwọn:7.25 ''X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Isọdi
Ilẹ-ilẹ vinyl mojuto Rigig ti wa ọna pipẹ lati awọn ibẹrẹ irẹlẹ wọn bi yiyan ti o gbowolori ti ko gbowolori si awọn ilẹ ipakà lile ti aṣa.Ohun kan ti ko yipada ni ifarada - ṣugbọn didara wa nipasẹ orule!Awọn ilẹ ipakà fainali wa ni oju igi gidi ati sojurigindin ti o rọrun lati fi sori ẹrọ ati paapaa rọrun lati ṣetọju.
Awọn ilẹ ipakà fainali ti aṣa jẹ ti PVC patapata ati, ni awọn iwọn otutu ti o ga ju 80-90F, bẹrẹ lati faagun ati padanu iduroṣinṣin.Ni iṣe, eyi ti tumọ si pe vinyl plank ko le ṣe iṣeduro lailewu ni awọn aaye ti o de awọn iwọn otutu ti o ga ju 90F tabi ni awọn fifi sori ẹrọ nibiti ṣiṣe to gun julọ ti ga ju ẹsẹ 35 lọ.
A, TopJoy, koju ọran yii nipa ṣiṣe atunṣe ipilẹ ti awọn pákó wa si akojọpọ-ọpọlọpọ-limestone.Nipa lilo to 70% akoonu simenti ninu mojuto ti planks wa, a ṣẹda awọn oto "kosemi" ohun ini ti wa ipakà.Kii ṣe nikan ni akoonu simenti giga tumọ si imugboroosi ati ihamọ lati bẹrẹ pẹlu, ṣugbọn o tun tumọ si pe nigbati imugboroja ati ihamọ ba waye awọn ilẹ ipakà le mu.
Ẹnikẹni ti o n wa ilẹ ti o tọ, ti o pẹ ti o mu iwo oju aaye eyikeyi pọ si ti kii yoo fọ banki naa.Ilẹ-ilẹ fainali mojuto lile jẹ pipe fun ọ!
| Sipesifikesonu | |
| Dada Texture | Igi sojurigindin |
| Ìwò Sisanra | 4mm |
| Underlay (Aṣayan) | IXPE/EVA(1mm/1.5mm) |
| Wọ Layer | 0.2mm.(8 Milionu) |
| Ìbú | 7.25" (184mm.) |
| Gigun | 48" (1220mm.) |
| Pari | Aso UV |
| Titiipa System |
|
| Ohun elo | Iṣowo & Ibugbe |
Data Imọ-ẹrọ:
| SPC RIGID-mojuto PLANK imọ DATA | ||
| Imọ Alaye | Ọna idanwo | Esi |
| Onisẹpo | EN427 & amupu; | Kọja |
| Sisanra lapapọ | EN428 & amupu; | Kọja |
| Sisanra ti yiya fẹlẹfẹlẹ | EN429 & amupu; | Kọja |
| Iduroṣinṣin Onisẹpo | IOS 23999: 2018 & ASTM F2199-18 | Ilana iṣelọpọ ≤0.02% (82oC @ 6 wakati) |
| Kọja Itọsọna iṣelọpọ ≤0.03% (82oC @ 6 wakati) | ||
| Curling (mm) | IOS 23999: 2018 & ASTM F2199-18 | Iye 0.16mm(82oC @ 6 wakati) |
| Agbara Peeli (N/25mm) | ASTM D903-98 (2017) | Ilana iṣelọpọ 62 (Apapọ) |
| Kọja Itọsọna iṣelọpọ 63 (Apapọ) | ||
| Aimi fifuye | ASTM F970-17 | Ifiweranṣẹ ti o ku: 0.01mm |
| Ti o ku Indentation | ASTM F1914-17 | Kọja |
| ibere Resistance | ISO 1518-1: 2011 | Ko si penetrated awọn ti a bo ni fifuye ti 20N |
| Titiipa Agbara (kN/m) | ISO 24334:2014 | Ilana iṣelọpọ 4.9 kN / m |
| Kọja Itọsọna iṣelọpọ 3.1 kN / m | ||
| Iyara awọ si Imọlẹ | ISO 4892-3: 2016 Cycle 1 & ISO105–A05:1993/Kọr.2:2005& ASTM D2244-16 | ≥ 6 |
| Ifesi si ina | BS EN14041: 2018 Abala 4.1 & EN 13501-1: 2018 | Bfl-S1 |
| ASTM E648-17a | Kilasi 1 | |
| ASTM E 84-18b | Kilasi A | |
| Awọn itujade VOC | BS EN 14041:2018 | ND - Pass |
| ROHS / Heavy Irin | EN 71-3: 2013 + A3: 2018 | ND - Pass |
| De ọdọ | Ko si 1907/2006 de ọdọ | ND - Pass |
| Formaldehyde itujade | BS EN14041:2018 | Kilasi: E1 |
| Idanwo Phthalate | BS EN 14041:2018 | ND - Pass |
| PCP | BS EN 14041:2018 | ND - Pass |
| Iṣilọ ti Awọn eroja | EN 71 – 3:2013 | ND - Pass |
Alaye Iṣakojọpọ:
| Alaye Iṣakojọpọ (4.0mm) | |
| Awọn PC/ctn | 12 |
| Àdánù(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Ìwọ̀n (KG)/GW | 24500 |
