Chofoza u-DIY Ukufaka I-Rigid Core Luxury Vinyl Plank
Incazelo:
Into:UC1107-5
Ubukhulu:4.0mm ~ 8.0mm
Isendlalelo sokugqoka:0.2mm ~ 0.7mm
I-underlay (Ongakukhetha):EVA/IXPE, 1.0mm~2.0mm
Usayizi:7.25'' X 48''/ 6''X48''/ 9''X48''/ 7''X36''/ 6''X36''/ 9''X36''/ Ukwenza ngokwezifiso
I-Rigig core vinyl flooring isihambe indlela ende kusukela ekuqaleni kwayo okuphansi njengendlela engabizi kakhulu kunephansi lendabuko yokhuni oluqinile.Into eyodwa engakashintshi ukukwazi ukuthengeka - kodwa ikhwalithi idlula ophahleni!Izitezi zethu ze-vinyl zinokubukeka kokhuni lwangempela kanye nokuthungwa okulula ukukufaka futhi kulula nakakhulu ukuzinakekela.
Izitezi ze-vinyl zendabuko zakhiwe cishe ngokuphelele i-PVC futhi, emazingeni okushisa angaphezu kuka-80-90F, ziqala ukukhula futhi zilahlekelwe ukuzinza.Empeleni, lokhu kusho ukuthi ipulangwe le-vinyl alikwazanga ukutuswa ngokuphephile ezindaweni ezifinyelela amazinga okushisa angaphezu kuka-90F noma ekufakweni lapho isikhathi eside singaphezu kwamamitha angu-35.
Thina, i-TopJoy, sibhekane nale nkinga ngokuhlela kabusha umnyombo wamapulangwe ethu ukuze abe yinhlanganisela yetshe le-limestone.Ngokusebenzisa okuqukethwe kwe-limestone okungafika ku-70% enkabeni yamapulangwe ethu, sakha indawo “eqinile” eyingqayizivele yephansi lethu.Akukhona nje kuphela ukuthi okuqukethwe okuphezulu kwe-limestone kusho ukunwetshwa okuncane kanye nokufinyela ukuqala, kodwa futhi kusho ukuthi uma ukunwetshwa nokufinyela kwenzeka izitezi zingakwazi ukukusingatha.
Noma ubani ofuna isitezi esiqinile, esihlala isikhathi eside esithuthukisa ukubukeka kwanoma iyiphi indawo futhi engeke iphule ibhange.I-Rigid core vinyl flooring ilungele wena!
| Ukucaciswa | |
| Ukwakheka Kobuso | Ukwakheka Kwezinkuni |
| Ubukhulu Sebonke | 4mm |
| I-underlay (Ongakukhetha) | I-IXPE/EVA(1mm/1.5mm) |
| Gqoka Isendlalelo | 0.2mm.(8 Mil.) |
| Ububanzi | 7.25" (184mm.) |
| Ubude | 48" (1220mm.) |
| Qeda | I-UV Coating |
| Uhlelo lokukhiya |
|
| Isicelo | Ezohwebo Nezindawo Zokuhlala |
Idatha Yezobuchwepheshe:
| IDATHA YOBUCHWEPHESHE YE-SPC RIGID-CORE PLANK | ||
| Ulwazi Lobuchwepheshe | Indlela Yokuhlola | Imiphumela |
| I-Dimensional | I-EN427 & | Dlula |
| Ubukhulu ngokuphelele | I-EN428 & | Dlula |
| Ubukhulu bezendlalelo zokugqoka | I-EN429 & | Dlula |
| Ukuzinza kweDimensional | I-IOS 23999:2018 ne-ASTM F2199-18 | Izikhombisi-ndlela Zokukhiqiza ≤0.02% (82oC @ 6hrs) |
| Kuzo zonke izikhombisi-ndlela zokukhiqiza ≤0.03% (82oC @ 6hrs) | ||
| Ukugoqa (mm) | I-IOS 23999:2018 ne-ASTM F2199-18 | Ivelu 0.16mm(82oC @ 6hrs) |
| Amandla Ekhasi (N/25mm) | I-ASTM D903-98(2017) | I-Manufacturing Direction 62 (Isilinganiso) |
| I-Direct Manufacture Direction 63 (Isilinganiso) | ||
| I-Static Load | I-ASTM F970-17 | Ukuhlehliswa Okusele:0.01mm |
| Ukuhlehliswa Kwezinsalela | I-ASTM F1914-17 | Dlula |
| I-Scratch Resistance | ISO 1518-1:2011 | Akukho kungene i-coating ekulayisheni okungu-20N |
| Amandla Okukhiya(kN/m) | ISO 24334:2014 | Isikhombisi-ndlela Sokukhiqiza 4.9 kN/m |
| Kuzo zonke izikhombisi-ndlela Zokukhiqiza 3.1 kN/m | ||
| Ukushesha Kombala Ekukhanyeni | ISO 4892-3:2016 Cycle 1 & ISO105–A05:1993/Cor.2:2005&ASTM D2244-16 | ≥ 6 |
| Ukusabela emlilweni | I-BS EN14041:2018 Isigaba somthetho 4.1 & EN 13501-1:2018 | I-Bfl-S1 |
| I-ASTM E648-17a | Ikilasi 1 | |
| I-ASTM E 84-18b | Ikilasi A | |
| Ukukhishwa kwe-VOC | I-BS EN 14041:2018 | ND - Dlula |
| I-ROHS/Insimbi Enzima | EN 71-3:2013+A3:2018 | ND - Dlula |
| Finyelela | No 1907/2006 REACH | ND - Dlula |
| Ukukhishwa kwe-formaldehyde | I-BS EN14041:2018 | Ikilasi: E1 |
| Ukuhlolwa kwe-Phthalate | I-BS EN 14041:2018 | ND - Dlula |
| I-PCP | I-BS EN 14041:2018 | ND - Dlula |
| Ukufuduka Kwezinto Ezithize | EN 71 – 3:2013 | ND - Dlula |
Ukupakisha Ulwazi:
| Ulwazi Lokupakisha(4.0mm) | |
| Ama-PC/ctn | 12 |
| Isisindo(KG)/ctn | 22 |
| Ctns/pallet | 60 |
| Plt/20'FCL | 18 |
| Sqm/20'FCL | 3000 |
| Isisindo(KG)/GW | 24500 |
